Last Modified: Thursday, September 19, 2019

MadgeTech Loggers

TQSoft™ with MadgeTech Loggers

HiTemp150 Temperature RTD -40 to +150ºC

hitemp150Used together with the TQSoft™ validation software tools for calibration, calibration checking, programming, downloading, analysis and reporting, the HiTemp150 solution presents an extremely effective, accurate and cutting edge solution for a range of thermal validation applications.

HiTemp150  temperature data loggers  are rugged, submersible battery powered stand alone loggers for use with 21CFR Part 11 compliant TQSoft™ software…

  • Thermal Mapping Validation
  • Storage Area Validation
  • Sterilizer Validation/Autoclave Validation
  • Stability Chamber Validation
  • Incubator Validation
  • Food Validation

Loggers can be quickly programmed by TQSoft™ software in batches to automatically record up to 32,767 temperature measurements. The loggers have a 2 inch rigid external fast response probe. It can be used in harsh environments. It has a real time clock for time stamping all measurements and data is stored in non volatile solid state memory. The memory is protected in the event of a battery problem. TQSoft™ enables quick and easy programming and downloading for large batches of up to 128 loggers. 

 HiTemp150FP Temperature RTD -40 to +150ºC with Flexible Probe

hitemp150fpThe HiTemp150 temperature data loggers can be supplied with a 24” (61cm) flexible silicone rubber enclosed cable with 4” (10.16cm) penetration style stainless steel probe and 316 stainless steel body.






IFC200 - USB Interface Cable

hitemp150 ifc200The IFC200 is a USB interface package. It provides  a USB interface to the majority of MadgeTech data loggers without the need for a separate USB-Serial converter. The IFC200 communicates directly with TQSoft™ software, eliminating the need for complicated virtual COM port setup. The IFC200 includes the interface cable with a 3.5mm audio jack cable, device drivers, and IFC200 quick installation guide.



Batch programming and downloading of MadgeTech Loggers

  • madgetech interface windowConnect multiple loggers to PC using multiple IFC200’s, limited by only USB expansion capability or number of IFC200’s available
  • Dramatically improves programming and download times
  • Calibrate or Check batches of loggers
  • Test Specifications automatically record serial numbers programmed for data acquisition, making life simpler
  • Reports are automatically generated, showing serial number used, calibration information for each logger
  • Logger usage can be automatically tracked, individual serial numbers can be programmed to alert for re-calibration on date, or time in use, or number of tests performed



Temperature Sensor: 100? Platinum RTD
Range: -40 to +150ºC
Resolution: 0.05ºC
Accuracy: ±0.25ºC (100ºC to 150ºC)
Start Time: Software programmable start time and date
Memory: 32,767 readings
Reading Interval: 1 reading per second to 1 every 12 hours
Calibration Date: Recorded within device
Power: 3.9V high-temperature lithium battery included
Battery Life: 1 year typical (1 minute reading rate at 25ºC)
Data Format: Date and time stamped ºC, ºF, K, ºR
Time Accuracy: ±1 minute/month at 20ºC (RS232 cable not in use)
Computer Interface: P C serial or USB (Interface cable required); 2,400 baud
Operating Environment: -40 to +150ºC, 0 to 100%RH
Approvals: CE


Dimensions (Body): 1.1” x 1.75” dia. (28mm x 45mm dia.)
Dimensions (Probe): 2.0” x 3/16” dia. (51mm x 5mm dia.)
Material: 316 Stainless Steel
Weight: 8 oz (225 g)


Dimensions (Body): 1.1” x 1.75” dia. (28mm x 45mm dia.)
Dimensions (Cable): 2.0’ x .14” dia. (60 mm x 4mm dia.)
Dimensions (Probe Handle): 1½” x 3/8” dia. (39mm x 10 mm dia.)
Dimensions (Probe): 4” x 1/8” dia. (102mm x 4mm dia.)
Material (Body & Probe): 316 stainless steel
Weight: 9 oz (227 g)

Previous/Next Link

Share With Others: